Tata Technologies Nordics AB jobb

Technical Lead - HIL Development & Integration At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. HIL Development & Integration Design, development, commissioning, and maintenance of HIL test rigs. Integration of ECUs, I/O systems, communication interfaces, sensors, and actuators. Hardware configuration and setup using platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat. Development of real-time test environments for vehicle subsystem or complete vehicle validation. Strong understanding of HIL architecture, signal flow, and interface management. HIL Modelling & Real-Time Simulation (Mandatory work experience - at Any domain) MATLAB/Simulink model development for vehicle, plant, environment, and control system simulations. Real-time model optimization and code generation for HIL deployment. Vehicle Dynamics modelling and understanding of longitudinal, lateral, and powertrain behavior -( Not mandatory this point) Model validation, calibration, and debugging in real-time environments. Experience with simulation tools such as ASM, CarMaker, VTD, Prescan, or similar platforms. (Any tool basic understanding) Automotive Communication & Diagnostics (Mandatory) Strong expertise in CAN, CAN FD, LIN, FlexRay, Automotive Ethernet. Development and troubleshooting of communication databases and network configurations. Hands-on debugging using CANoe, CANalyzer, ControlDesk, INCA, or similar tools. Root cause analysis of ECU, network, and system-level issues. HIL Operations & Maintenance (Mandatory) Daily operation and monitoring of HIL benches. Software flashing, configuration management, and release deployment. Troubleshooting hardware, software, model, and communication-related issues. Test environment health monitoring and issue resolution. Coordination with development, validation, and integration teams for system readiness. Test Automation (Good to Have) Automation using Python, CAPL, AutomationDesk, Robot Framework, or similar frameworks. Automated regression execution and reporting. CI/CD integration using Jenkins, GitLab CI, Azure DevOps, or equivalent tools. 6. ADAS & Sensor Knowledge (Good to Have) Understanding of ADAS functions such as ACC, AEB, LKA, TSR, BSD, and Pilot Assist. Knowledge of Radar, Camera, LiDAR, Ultrasonic, GNSS, and IMU sensors. Experience with ADAS scenario generation and sensor simulation is advantageous. 7. System-Level Debugging & Technical Leadership (Highly Preferred) End-to-end debugging across ECU, communication network, simulation models, and HIL systems. Ability to define HIL architecture, improve test processes, and mentor engineering teams. Strong ownership mindset and capability to drive technical discussions with customers. Profiles should demonstrate strong hands-on experience in: HIL Development & Integration HIL Modelling & Real-Time Simulation Vehicle Dynamics Modelling HIL Operations, Maintenance & Troubleshooting Automotive Communication & Diagnostics System-Level Debugging Secondary Skills (Good to Have) ADAS Domain Knowledge Sensor Technologies Test Automation & CI/CD Why Join Tata Technologies? If you are passionate about bringing innovation to the projects you work on and want to help shape the future of automotive electronic systems, we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

HIL Engineer At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. HIL Development & Integration Design, development, commissioning, and maintenance of HIL test rigs. Integration of ECUs, I/O systems, communication interfaces, sensors, and actuators. Hardware configuration and setup using platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat. Development of real-time test environments for vehicle subsystem or complete vehicle validation. Strong understanding of HIL architecture, signal flow, and interface management. HIL Modelling & Real-Time Simulation (Mandatory work experience - at Any domain) MATLAB/Simulink model development for vehicle, plant, environment, and control system simulations. Real-time model optimization and code generation for HIL deployment. Vehicle Dynamics modelling and understanding of longitudinal, lateral, and powertrain behavior -( Not mandatory this point) Model validation, calibration, and debugging in real-time environments. Experience with simulation tools such as ASM, CarMaker, VTD, Prescan, or similar platforms. (Any tool basic understanding) Automotive Communication & Diagnostics (Mandatory) Strong expertise in CAN, CAN FD, LIN, FlexRay, Automotive Ethernet. Development and troubleshooting of communication databases and network configurations. Hands-on debugging using CANoe, CANalyzer, ControlDesk, INCA, or similar tools. Root cause analysis of ECU, network, and system-level issues. HIL Operations & Maintenance (Mandatory) Daily operation and monitoring of HIL benches. Software flashing, configuration management, and release deployment. Troubleshooting hardware, software, model, and communication-related issues. Test environment health monitoring and issue resolution. Coordination with development, validation, and integration teams for system readiness. Test Automation (Good to Have) Automation using Python, CAPL, AutomationDesk, Robot Framework, or similar frameworks. Automated regression execution and reporting. CI/CD integration using Jenkins, GitLab CI, Azure DevOps, or equivalent tools. 6. ADAS & Sensor Knowledge (Good to Have) Understanding of ADAS functions such as ACC, AEB, LKA, TSR, BSD, and Pilot Assist. Knowledge of Radar, Camera, LiDAR, Ultrasonic, GNSS, and IMU sensors. Experience with ADAS scenario generation and sensor simulation is advantageous. 7. System-Level Debugging & Technical Leadership (Highly Preferred) End-to-end debugging across ECU, communication network, simulation models, and HIL systems. Ability to define HIL architecture, improve test processes, and mentor engineering teams. Strong ownership mindset and capability to drive technical discussions with customers. Profiles should demonstrate strong hands-on experience in: HIL Development & Integration HIL Modelling & Real-Time Simulation Vehicle Dynamics Modelling HIL Operations, Maintenance & Troubleshooting Automotive Communication & Diagnostics System-Level Debugging Secondary Skills (Good to Have) ADAS Domain Knowledge Sensor Technologies Test Automation & CI/CD Why Join Tata Technologies? If you are passionate about bringing innovation to the projects you work on and want to help shape the future of automotive electronic systems, we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. We are looking for Technical Lead Exterior Lighting/ Exterior Functions. Role Summary We are seeking a Senior Test Automation Lead / SPOC to lead test automation activities for advanced automotive Exterior Lighting and Exterior Function systems. The role combines technical leadership, test automation strategy, stakeholder management, and onsite-offshore coordination to ensure delivery of high-quality automated verification solutions integrated into Continuous Integration (CI) environments. The candidate will act as the primary technical focal point for automation development, validation activities, and cross-functional collaboration across multiple testing levels including vehicle, system, integration, and component verification. Key Responsibilities Technical Leadership Lead and coordinate onsite and offshore test automation teams. Provide technical guidance, mentoring, and support to automation engineers. Act as the primary technical interface between development, integration, verification, and CI teams. Establish and enforce automation best practices, coding standards, and framework governance. Test Automation Strategy Define and drive the overall test automation strategy aligned with project goals and quality objectives. Develop scalable automation architectures and CI/CD integration approaches. Evaluate and adopt innovative techniques, including AI-assisted test generation, where beneficial. Test Analysis & Planning Analyze requirements, features, and verification needs to identify automation opportunities. Develop automation test plans, effort estimates, schedules, and resource strategies. Ensure alignment between automation activities, delivery milestones, and program objectives. Test Execution & Delivery Oversee development, maintenance, and execution of automated test cases. Ensure test coverage across: Software-in-the-Loop (SIL) Hardware-in-the-Loop (HIL) Vehicle/System Integration Testing Component-Level Verification Regression and Confirmation Testing Drive successful deployment of automated tests into CI environments. Quality Assurance & Reporting Monitor automation progress, quality metrics, risks, and defect trends. Lead regular technical reviews and status reporting activities. Ensure test automation deliverables meet quality, maintainability, and performance expectations. Communicate delivery status and recommendations to stakeholders. Domain Support & Collaboration Provide technical expertise within: Exterior Lighting Visibility Systems Vehicle Locking Functions Alarm Systems Door and Closure Systems Support onsite investigations, manual verification activities, and requirement clarifications. Work closely with software development, system integration, CI, and validation teams. Required Qualifications Bachelor's degree in Computer Science, Electrical Engineering, Electronics, Physics, or equivalent. Proven experience in quality assurance and verification of complex embedded systems. Experience leading automotive test automation activities and distributed engineering teams. Strong stakeholder and delivery management capabilities. Fluent in written and spoken English. Required Technical Skills Automotive Test Automation Test Automation Framework Design and Architecture Automated Test Case Development and Management Continuous Integration / Continuous Testing Python and/or CAPL scripting CANoe Jenkins or similar CI tools Linux Requirement and Test Management Tools Embedded Systems Verification & Validation HIL, SIL and Integration Testing Preferred Skills Experience in Exterior Lighting and Exterior Functions. AI-assisted test generation and automation techniques. Software development background. Model-Based Development and Testing experience. Why Join Tata Technologies? If you are passionate about bringing innovation to the projects you work on and want to help shape the future of automotive electronic systems, we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. Role Summary We are seeking a Senior Test Automation Lead / SPOC to lead test automation activities for advanced automotive Exterior Lighting and Exterior Function systems. The role combines technical leadership, test automation strategy, stakeholder management, and onsite-offshore coordination to ensure delivery of high-quality automated verification solutions integrated into Continuous Integration (CI) environments. The candidate will act as the primary technical focal point for automation development, validation activities, and cross-functional collaboration across multiple testing levels including vehicle, system, integration, and component verification. Key Responsibilities Technical Leadership Lead and coordinate onsite and offshore test automation teams. Provide technical guidance, mentoring, and support to automation engineers. Act as the primary technical interface between development, integration, verification, and CI teams. Establish and enforce automation best practices, coding standards, and framework governance. Test Automation Strategy Define and drive the overall test automation strategy aligned with project goals and quality objectives. Develop scalable automation architectures and CI/CD integration approaches. Evaluate and adopt innovative techniques, including AI-assisted test generation, where beneficial. Test Analysis & Planning Analyze requirements, features, and verification needs to identify automation opportunities. Develop automation test plans, effort estimates, schedules, and resource strategies. Ensure alignment between automation activities, delivery milestones, and program objectives. Test Execution & Delivery Oversee development, maintenance, and execution of automated test cases. Ensure test coverage across: Software-in-the-Loop (SIL) Hardware-in-the-Loop (HIL) Vehicle/System Integration Testing Component-Level Verification Regression and Confirmation Testing Drive successful deployment of automated tests into CI environments. Quality Assurance & Reporting Monitor automation progress, quality metrics, risks, and defect trends. Lead regular technical reviews and status reporting activities. Ensure test automation deliverables meet quality, maintainability, and performance expectations. Communicate delivery status and recommendations to stakeholders. Domain Support & Collaboration Provide technical expertise within: Exterior Lighting Visibility Systems Vehicle Locking Functions Alarm Systems Door and Closure Systems Support onsite investigations, manual verification activities, and requirement clarifications. Work closely with software development, system integration, CI, and validation teams. Required Qualifications Bachelor's degree in Computer Science, Electrical Engineering, Electronics, Physics, or equivalent. Proven experience in quality assurance and verification of complex embedded systems. Experience leading automotive test automation activities and distributed engineering teams. Strong stakeholder and delivery management capabilities. Fluent in written and spoken English. Required Technical Skills Automotive Test Automation Test Automation Framework Design and Architecture Automated Test Case Development and Management Continuous Integration / Continuous Testing Python and/or CAPL scripting CANoe Jenkins or similar CI tools Linux Requirement and Test Management Tools Embedded Systems Verification & Validation HIL, SIL and Integration Testing Preferred Skills Experience in Exterior Lighting and Exterior Functions. AI-assisted test generation and automation techniques. Software development background. Model-Based Development and Testing experience. Why Join Tata Technologies? If you are passionate about bringing innovation to the projects you work on and want to help shape the future of automotive electronic systems, we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. We are currently looking for an experienced Technical Lead to join our Chassis Engineering team, with a primary focus on Steering and Brake Systems. This is an exciting opportunity to lead vehicle-level testing activities, support validation programs, and collaborate with global engineering teams to develop next-generation mobility solutions. About the Assignment As a Technical Lead, you will be responsible for leading and coordinating vehicle-level validation activities for steering and brake systems. You will act as the primary onsite interface for testing activities in Sweden, working closely with customer teams, offshore engineering teams, and development organizations. The role combines hands-on vehicle testing, system validation, test strategy development, defect management, and cross-functional coordination throughout the complete testing lifecycle. Main Responsibilities As a Technical Lead, you will: Lead and drive vehicle-level testing activities for Steering and Brake Systems. Define, plan, and execute testing strategies for new development projects. Coordinate test activities between onsite and offshore engineering teams. Act as the primary point of contact for customer-facing testing activities in Sweden. Perform and support: Vehicle Testing System Testing HIL (Hardware-in-the-Loop) Testing SIL (Software-in-the-Loop) Testing Ensure proper test planning, execution, reporting, and defect tracking. Collaborate with development teams to resolve issues and improve system performance. Coordinate closely with Attribute and Calibration teams. Lead vehicle-level attribute verification and validation activities. Support continuous improvement of testing methodologies and validation processes. Required Qualifications Valid Swedish Category B Driving License. Minimum 8 years of experience in: System Testing Functional Testing Vehicle Testing Strong knowledge of: Steering Systems Brake Systems Vehicle-Level Validation Experience with HIL/SIL test environments, including dSPACE platforms. Proficiency with Vector tools: CANoe CANalyzer Experience with ECU debugging tools such as: INCA Embedded Debuggers Strong experience in end-to-end ECU and software validation activities. Experience with: UDS Diagnostics Automotive communication and validation workflows Technical Competencies Experience with: vTESTstudio dSPACE AutomationDesk Python for test automation and scripting ECU software testing and integration Diagnostic testing and troubleshooting Vehicle-level verification and validation Defect management and issue resolution Meritorious Qualifications T1 and T2 Test Driver Licenses Knowledge of CI/CD environments such as Jenkins. Experience with ISO 26262 Functional Safety Testing. Experience within chassis systems development. Exposure to vehicle dynamics and attribute verification activities. Why Join Tata Technologies? If you are passionate about bringing innovation to the projects you work on and want to help shape the future of automotive electronic systems, we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. We are currently looking for an experienced Vehicle Test Engineer to join our Chassis Engineering team, with a primary focus on Steering and Brake Systems. This is an exciting opportunity to lead vehicle-level testing activities, support validation programs, and collaborate with global engineering teams to develop next-generation mobility solutions. About the Assignment As a Vehicle Test Engineer, you will be responsible for leading and coordinating vehicle-level validation activities for steering and brake systems. You will act as the primary onsite interface for testing activities in Sweden, working closely with customer teams, offshore engineering teams, and development organizations. The role combines hands-on vehicle testing, system validation, test strategy development, defect management, and cross-functional coordination throughout the complete testing lifecycle. Main Responsibilities As a Vehicle Test Engineer, you will: Lead and drive vehicle-level testing activities for Steering and Brake Systems. Define, plan, and execute testing strategies for new development projects. Coordinate test activities between onsite and offshore engineering teams. Act as the primary point of contact for customer-facing testing activities in Sweden. Perform and support: Vehicle Testing System Testing HIL (Hardware-in-the-Loop) Testing SIL (Software-in-the-Loop) Testing Ensure proper test planning, execution, reporting, and defect tracking. Collaborate with development teams to resolve issues and improve system performance. Coordinate closely with Attribute and Calibration teams. Lead vehicle-level attribute verification and validation activities. Support continuous improvement of testing methodologies and validation processes. Required Qualifications Valid Swedish Category B Driving License. Minimum 8 years of experience in: System Testing Functional Testing Vehicle Testing Strong knowledge of: Steering Systems Brake Systems Vehicle-Level Validation Experience with HIL/SIL test environments, including dSPACE platforms. Proficiency with Vector tools: CANoe CANalyzer Experience with ECU debugging tools such as: INCA Embedded Debuggers Strong experience in end-to-end ECU and software validation activities. Experience with: UDS Diagnostics Automotive communication and validation workflows Technical Competencies Experience with: vTESTstudio dSPACE AutomationDesk Python for test automation and scripting ECU software testing and integration Diagnostic testing and troubleshooting Vehicle-level verification and validation Defect management and issue resolution Meritorious Qualifications T1 and T2 Test Driver Licenses Knowledge of CI/CD environments such as Jenkins. Experience with ISO 26262 Functional Safety Testing. Experience within chassis systems development. Exposure to vehicle dynamics and attribute verification activities. Why Join Tata Technologies? If you are passionate about bringing innovation to the projects you work on and want to help shape the future of automotive electronic systems, we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and validating the products of tomorrow for the world's leading manufacturers. Due to our continued growth, we are now recruiting for a Technical Lead to join our team in Gothenburg, Sweden. We are looking for a Technical Lead to join our team and contribute to the development of advanced electronic systems within the automotive domain. In this assignment, you will collaborate closely with development teams, test environments, and suppliers to ensure high quality and robustness in our ECU platforms and electronic hardware. Responsibilities Design, review, and develop advanced electronic hardware for automotive systems. Support requirement development, including requirement definition, analysis, review and follow-up with suppliers. Assist the team by breaking down complex hardware and electronics topics into clear, actionable information. Participate in technical discussions with stakeholders and external suppliers. Support test teams and rig environments when needed, including troubleshooting, verification, and technical analysis. Systemization of HW capabilities and interface alignments. Modularization of future component set-up. EMC expertise for the team. Process development around the DCU (Door Control Unit) component's system. Advanced Engineering, investigating emerging technologies. Critical Skills & Experience We are looking for someone with: Proven experience in advanced electronic hardware design and development. Proven experience in mechatronics design and ECU design for such loads would be a big plus. Strong capability in requirements engineering – creation, analysis and review. Ability to decompose complex technical topics into structured, useful data for decision-making. Experience driving technical discussions with suppliers and navigating topics across teams. Why You? You are a skilled hardware engineer with the right mindset and a strong technical foundation. You have demonstrated the ability to: Support cross-functional teams across different ECU projects. Manage both ongoing issues and new development topics simultaneously. Contribute actively to technical dialogues, troubleshooting, and analysis in collaboration with testers and rig engineers. Drive hardware-related discussions both with suppliers and internal stakeholders. Why Join Tata Technologies? If you are passionate about bringing innovation to the projects you work on and want to help shape the future of automotive electronic systems, we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and validating the products of tomorrow for the world's leading manufacturers. Due to our continued growth, we are now recruiting for an Electronic Hardware Engineer to join our team in Gothenburg, Sweden. We are looking for an Electronic Hardware Engineer to join our team and contribute to the development of advanced electronic systems within the automotive domain. In this assignment, you will collaborate closely with development teams, test environments, and suppliers to ensure high quality and robustness in our ECU platforms and electronic hardware. Responsibilities Design, review, and develop advanced electronic hardware for automotive systems. Support requirement development, including requirement definition, analysis, review and follow-up with suppliers. Assist the team by breaking down complex hardware and electronics topics into clear, actionable information. Participate in technical discussions with stakeholders and external suppliers. Support test teams and rig environments when needed, including troubleshooting, verification, and technical analysis. Systemization of HW capabilities and interface alignments. Modularization of future component set-up. EMC expertise for the team. Process development around the DCU (Door Control Unit) component's system. Advanced Engineering, investigating emerging technologies. Critical Skills & Experience We are looking for someone with: Proven experience in advanced electronic hardware design and development. Proven experience in mechatronics design and ECU design for such loads would be a big plus. Strong capability in requirements engineering – creation, analysis and review. Ability to decompose complex technical topics into structured, useful data for decision-making. Experience driving technical discussions with suppliers and navigating topics across teams. Why You? You are a skilled hardware engineer with the right mindset and a strong technical foundation. You have demonstrated the ability to: Support cross-functional teams across different ECU projects. Manage both ongoing issues and new development topics simultaneously. Contribute actively to technical dialogues, troubleshooting, and analysis in collaboration with testers and rig engineers. Drive hardware-related discussions both with suppliers and internal stakeholders. Why Join Tata Technologies? If you are passionate about bringing innovation to the projects you work on and want to help shape the future of automotive electronic systems, we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. We are currently looking for aTechnical Lead to join an innovative vehicle systems team focused on developing locking, door, window, and access control functions for next-generation vehicle platforms. About the Assignment As a Technical Lead, you will play a key role in developing, defining, and verifying robust system solutions and customer-oriented functionality related to door control systems. You will work with both existing and future vehicle architectures, ensuring system designs are scalable, safe, and aligned with overall vehicle requirements. The role combines systemization, requirements engineering, system modeling, safety analysis, and supplier collaboration within a highly cross-functional environment. Main Responsibilities As a Technical Lead, you will: Define and develop system functions and behaviors related to: Door Control Systems Locking Functions Window Control Functions Alarm and Access Features Develop, decompose, and manage system requirements across multiple abstraction levels. Create and maintain system models and technical documentation. Define technical solutions in alignment with system architecture guidelines. Contribute to safety-related system development according to ISO 26262. Participate in technical discussions with suppliers and engineering stakeholders. Support system verification and validation activities. Collaborate closely with software, hardware, function, and architecture teams. Support the development of future vehicle user experiences through robust system design. Required Qualifications Minimum 4+ years of experience in: System Design Function Development System Engineering System Modeling Strong experience in: Requirement Engineering Requirement Decomposition Requirement Traceability Experience working with safety-critical systems. Practical knowledge of ISO 26262 Functional Safety. Experience using: Elektra CarWeaver Experience collaborating with suppliers and managing technical alignments. M.Sc. in: Systems Engineering Control & Mechatronics Computer Engineering Engineering Physics Or equivalent experience Fluent in English, both written and spoken. Meritorious Qualifications Hardware design knowledge. Experience with functional design methodologies. Understanding of user behavior, customer journeys, and use-case-driven development. Experience within automotive electrical architectures and vehicle systems development. Knowledge of vehicle access, door module, locking, or closure systems. If you are passionate about bringing innovation to the projects you work on, then we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. We are currently looking for a System Designer – Door Control Functions to join an innovative vehicle systems team focused on developing locking, door, window, and access control functions for next-generation vehicle platforms. About the Assignment As a System Designer, you will play a key role in developing, defining, and verifying robust system solutions and customer-oriented functionality related to door control systems. You will work with both existing and future vehicle architectures, ensuring system designs are scalable, safe, and aligned with overall vehicle requirements. The role combines systemization, requirements engineering, system modeling, safety analysis, and supplier collaboration within a highly cross-functional environment. Main Responsibilities As a System Designer, you will: Define and develop system functions and behaviors related to: Door Control Systems Locking Functions Window Control Functions Alarm and Access Features Develop, decompose, and manage system requirements across multiple abstraction levels. Create and maintain system models and technical documentation. Define technical solutions in alignment with system architecture guidelines. Contribute to safety-related system development according to ISO 26262. Participate in technical discussions with suppliers and engineering stakeholders. Support system verification and validation activities. Collaborate closely with software, hardware, function, and architecture teams. Support the development of future vehicle user experiences through robust system design. Required Qualifications Minimum 4+ years of experience in: System Design Function Development System Engineering System Modeling Strong experience in: Requirement Engineering Requirement Decomposition Requirement Traceability Experience working with safety-critical systems. Practical knowledge of ISO 26262 Functional Safety. Experience using: Elektra CarWeaver Experience collaborating with suppliers and managing technical alignments. M.Sc. in: Systems Engineering Control & Mechatronics Computer Engineering Engineering Physics Or equivalent experience Fluent in English, both written and spoken. Meritorious Qualifications Hardware design knowledge. Experience with functional design methodologies. Understanding of user behavior, customer journeys, and use-case-driven development. Experience within automotive electrical architectures and vehicle systems development. Knowledge of vehicle access, door module, locking, or closure systems. If you are passionate about bringing innovation to the projects you work on, then we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.