Vehicle Test Engineer At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. Role Overview We are seeking an experienced Vehicle Test Engineer to execute end-to-end Validation & Verification (V&V) of Alarm, Tailgate, and Lid functions at vehicle and subsystem levels. The role focuses on ensuring customer function compliance, identifying issues early, and supporting successful integration and release in line with automotive development milestones. Key Responsibilities Vehicle Testing & Validation Perform vehicle-level testing (VIL) for: Tailgate / Boot Lid operations (switches, foot sensor, app control) Alarm functions (motion sensor, inclination, reduced guard) Charge lid functionality (where applicable) Validate functions against customer requirements across all test levels (vehicle, subsystem, component) Test Execution & Coverage Develop, maintain, and execute test cases Work with automation to understand the process, later stage you must maintain and update the automation scripts. Ensure requirement traceability and test coverage Support regression and integration testing for software releases Fault Detection & Analysis Identify, reproduce, and document issues observed during testing Perform log analysis (CAN/LIN) and basic debugging Raise and track defects in VIRA/Jira Collaborate with SW/HW teams for root cause analysis Integration & Release Support Support software flashing, vehicle integration, and release validation Participate in build verification, integration testing, and gate activities Required Qualifications Bachelor’s degree in Electronics / Electrical / Automotive Engineering Swedish Valid driving license (mandatory for vehicle testing) 5–10 years of experience in: Vehicle / System / ECU Testing Technical Skills Strong knowledge of vehicle electrical systems and functions Experience with: Vector tools (CANoe, CANalyzer) Diagnostics protocols (UDS) ECU flashing and log analysis Familiarity with HIL testing and test automation using vteststudio / Automation Desk Key Competencies Strong analytical and debugging skills High attention to detail and quality Effective communication and teamwork Proactive and hands-on approach If you are passionate about bringing innovation to the projects you work on, then we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

At Tata Technologies, we make product development dreams a reality by designing, engineering, and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting an Electrical Design Engineer to strengthen our engineering team. Scope of Role As an Electrical Design Engineer, you will be responsible for maintaining, updating, and validating electrical design documentation and calculations across multiple engineering platforms. The role ensures accuracy, consistency, and compliance with engineering standards across schematics, layouts, part lists, and system calculations. You will work closely with cross-functional teams to support electrical design integrity and system performance. Main Responsibilities Update and maintain electrical schematics and layouts, ensuring accurate location coding (EPLAN, AutoCAD). Develop and modify electrical drawings according to project specifications. Manage and validate electrical part lists, ensuring consistency and completeness of BOMs. Extract and verify data generated from EPLAN outputs. Perform and validate cable sizing and related calculations (El-vis tool). Support energy consumption calculations and related documentation. Maintain and update IP addressing within electrical documentation. Perform and validate Performance Level (PL) calculations in line with safety standards (Sistema). Develop and maintain electrical topology diagrams (Visio). Ensure consistency of location codes across all tools and documentation platforms. Collaborate with cross-functional teams to ensure alignment with system architecture and engineering requirements. Required Qualifications Bachelor’s degree or Diploma in Electrical Engineering or equivalent. 4 to 6 years of experience in electrical design engineering. Strong knowledge of electrical system design, industrial automation, and control panel engineering. Experience in developing and maintaining electrical schematics, layouts, and topology documentation. Good understanding of electrical safety standards, Performance Level (PL), and risk reduction principles. Experience working in industrial, manufacturing, or automotive environments. Ability to work independently and collaborate within cross-functional teams. Tools & Skills EPLAN – electrical schematics and part list generation AutoCAD – electrical layouts El-vis – cable calculations Sistema – performance level calculations Visio – topology documentation Strong knowledge of location code management and data consistency across tools Experience working with global teams and customer-specific standards Proficiency in English, both written and spoken Personal Qualities Strong analytical and problem-solving skills Detail-oriented with a structured approach to work Effective communication and collaboration skills Ability to manage multiple tasks and priorities in a fast-paced environment Proactive and self-driven mindset Comfortable working in cross-functional and international teams If you are passionate about bringing innovation to the projects you work on then we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

Embedded Software Engineer – Active Chassis Systems At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. We are currently looking for an Embedded Software Engineer to join a highly innovative team developing next-generation Active Chassis and Suspension Systems for future vehicle platforms. This role offers the opportunity to work across the full software stack, developing advanced control functions that enhance vehicle dynamics, comfort, and driving performance. About the Assignment As an Embedded Software Engineer, you will be part of a cross-functional team responsible for developing software for advanced suspension systems. The team works across application software, middleware, control algorithms, and supporting toolchains to deliver cutting-edge active chassis functionality. You will collaborate closely with software developers, system engineers, safety engineers, and test engineers, contributing throughout the software development lifecycle from concept to validation. Main Responsibilities As an Embedded Software Engineer, you will: Develop application software in C++ and middleware software in C for active chassis and suspension systems. Contribute to software development for both dedicated ECUs and centralized vehicle computing platforms. Collaborate with system, safety, and test engineers in a cross-functional environment. Support integration, testing, validation, and troubleshooting activities. Participate in the development of control algorithms and supporting toolchains. Contribute to software quality, performance, and safety throughout the development process. Drive technical improvements and continuous development of products and processes. Required Qualifications Master's degree in Electrical Engineering, Electronics Engineering, Software Engineering, Embedded Systems, or a related field. Minimum 5 years of experience in C++ (C++11/C++14) and/or C (C90/C99) development. Minimum 5 years of experience in real-time embedded software development. Experience within the automotive industry. Experience working with AUTOSAR. Knowledge of automotive communication protocols, including: CAN, Automotive Ethernet, Experience with UDS (Unified Diagnostic Services). Experience using Vector tools such as: CANoe, CANalyzer, vTESTstudio Knowledge of low-level embedded protocols: SPI, UART, PWM, DIO, PSI5 Experience with HIL systems and real-time simulation environments. Knowledge of ISO 26262 Functional Safety implementation. Familiarity with automotive cybersecurity standards. Fluent in English, both written and spoken. If you are passionate about bringing innovation to the projects you work on, then we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

Senior Technical Lead At Tata Technologies, we make product development dreams a reality by designing, engineering, and validating the products of tomorrow for the world's leading manufacturers. Due to our continued growth, we are now recruiting a Senior Technical Lead to strengthen our engineering team. Key Responsibilities Own the planning, coordination, and delivery of Brakes and Steering Software (SW) for customer projects, ensuring agreed scope, timing, and quality targets are met. Analyse RFQ/TR requirements and translate them into clear, prioritised, and actionable backlog items for development teams. Coordinate cross-functional software development activities and align deliverables across engineering, validation, project, and customer teams. Monitor project milestones, dependencies, risks, and issues; define mitigation actions and escalate critical concerns in a timely manner. Drive the investigation and resolution of technical issues affecting software development, integration, validation, or delivery. Represent the software domain in technical and commercial discussions to clarify requirements, assumptions, interfaces, and delivery expectations. Lead internal development initiatives in alignment with the product roadmap and customer programme needs. Maintain effective working relationships with customers, partners, suppliers, and internal stakeholders. Promote clear ownership, collaboration, accountability, and a strong customer focus throughout project execution. Required Qualifications and Experience 9–12 years of professional experience in the automotive industry, with substantial experience in braking, steering, chassis, or related vehicle-control systems. Proven experience with passenger-car software development lifecycles, project milestones, requirements management, integration, validation, and release processes. Strong knowledge of braking and steering system validation, including DPR/TR, test equipment, system interfaces, and applicable automotive standards. Hands-on experience with HIL testing using dSPACE tools such as ControlDesk, AutomationDesk, and VT System. Experience documenting test cases, executing tests, and managing test verdicts using SystemWeaver or Electra. Experience with automotive development, diagnostics, measurement, and calibration tools, including Vector tools, INCA, and MDA. Working knowledge of functional safety and automotive quality processes, including ISO 26262, ASPICE, FMEA/SFMEA, Technical Safety Concept (TSC), Technical Safety Requirements (TSR), FSR, degradation and safe-state analysis, DTC mapping, fault analysis, and system-level validation. Demonstrated experience in chassis software development, particularly steering and braking, covering component-, system-, and vehicle-level testing, legal requirements, and software-release documentation such as CRB/IRB. Experience with relevant engineering and lifecycle tools such as CarWeaver, Electra, Car-Com, KDP, and TCPLM. Strong communication and stakeholder-management skills, with the ability to work effectively across technical, project, and customer organisations. Preferred Qualifications Previous experience working with OEM programmes, development processes, tools, or interfaces is an advantage. If you are passionate about bringing innovation to the projects you work on then we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

Embedded Software Engineer – Active Chassis Systems At Tata Technologies, we make product development dreams a reality by designing, engineering, and delivering the products of tomorrow for the world's leading manufacturers. We are currently looking for an Embedded Software Engineer to join a highly innovative team developing next-generation Active Chassis and Suspension Systems for future vehicle platforms. This role offers the opportunity to work across the full software stack, developing advanced control functions that enhance vehicle dynamics, comfort, and driving performance. About the Assignment As an Embedded Software Engineer, you will be part of a cross-functional team responsible for developing software for advanced suspension systems. The team works across application software, middleware, control algorithms, and supporting toolchains to deliver cutting-edge active chassis functionality. You will collaborate closely with software developers, system engineers, safety engineers, and test engineers, contributing throughout the software development lifecycle from concept to validation. Main Responsibilities As an Embedded Software Engineer, you will: Develop application software in C++ and middleware software in C for active chassis and suspension systems. Contribute to software development for both dedicated ECUs and centralized vehicle computing platforms. Collaborate with system, safety, and test engineers in a cross-functional environment. Support integration, testing, validation, and troubleshooting activities. Participate in the development of control algorithms and supporting toolchains. Contribute to software quality, performance, and safety throughout the development process. Drive technical improvements and continuous development of products and processes. Required Qualifications Master's degree in Electrical Engineering, Electronics Engineering, Software Engineering, Embedded Systems, or a related field. Minimum 5 years of experience in C++ (C++11/C++14) and/or C (C90/C99) development. Minimum 5 years of experience in real-time embedded software development. Experience within the automotive industry. Experience working with AUTOSAR. Knowledge of automotive communication protocols, including: CAN, Automotive Ethernet, Experience with UDS (Unified Diagnostic Services). Experience using Vector tools such as: CANoe, CANalyzer, vTESTstudio Knowledge of low-level embedded protocols: SPI, UART, PWM, DIO, PSI5 Experience with HIL systems and real-time simulation environments. Knowledge of ISO 26262 Functional Safety implementation. Familiarity with automotive cybersecurity standards. Fluent in English, both written and spoken. If you are passionate about bringing innovation to the projects you work on, then we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date, it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

Technical Lead - Steering & Brakes At Tata Technologies, we make product development dreams a reality by designing, engineering, and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting a Technical Lead to strengthen our engineering team. Key Responsibilities Own the planning, coordination, and delivery of Brakes and Steering Software (SW) for customer projects, ensuring agreed scope, timing, and quality targets are met. Analyse RFQ/TR requirements and translate them into clear, prioritised, and actionable backlog items for development teams. Coordinate cross-functional software development activities and align deliverables across engineering, validation, project, and customer teams. Monitor project milestones, dependencies, risks, and issues; define mitigation actions and escalate critical concerns in a timely manner. Drive the investigation and resolution of technical issues affecting software development, integration, validation, or delivery. Represent the software domain in technical and commercial discussions to clarify requirements, assumptions, interfaces, and delivery expectations. Lead internal development initiatives in alignment with the product roadmap and customer programme needs. Maintain effective working relationships with customers, partners, suppliers, and internal stakeholders. Promote clear ownership, collaboration, accountability, and a strong customer focus throughout project execution. Required Qualifications and Experience 9–12 years of professional experience in the automotive industry, with substantial experience in braking, steering, chassis, or related vehicle-control systems. Proven experience with passenger-car software development lifecycles, project milestones, requirements management, integration, validation, and release processes. Strong knowledge of braking and steering system validation, including DPR/TR, test equipment, system interfaces, and applicable automotive standards. Hands-on experience with HIL testing using dSPACE tools such as ControlDesk, AutomationDesk, and VT System. Experience documenting test cases, executing tests, and managing test verdicts using SystemWeaver or Electra. Experience with automotive development, diagnostics, measurement, and calibration tools, including Vector tools, INCA, and MDA. Working knowledge of functional safety and automotive quality processes, including ISO 26262, ASPICE, FMEA/SFMEA, Technical Safety Concept (TSC), Technical Safety Requirements (TSR), FSR, degradation and safe-state analysis, DTC mapping, fault analysis, and system-level validation. Demonstrated experience in chassis software development, particularly steering and braking, covering component-, system-, and vehicle-level testing, legal requirements, and software-release documentation such as CRB/IRB. Experience with relevant engineering and lifecycle tools such as CarWeaver, Electra, Car-Com, KDP, and TCPLM. Strong communication and stakeholder-management skills, with the ability to work effectively across technical, project, and customer organisations. Preferred Qualifications Previous experience working with OEM programmes, development processes, tools, or interfaces is an advantage. If you are passionate about bringing innovation to the projects you work on then we would love to hear from you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest; each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

We are looking for a Technical Lead UX Designer specialized in digital accessibility to support both immediate accessibility audit needs and the development of a scalable accessibility capability within VG DTO and DxD organization. The role will focus on evaluating selected applications against WCAG 2.2 AA, identifying accessibility risks across key journeys, prioritising issues by user impact and severity, and translating findings into clear remediation guidance for product and engineering teams. The ideal candidate goes beyond automated checks. They should be able to conduct keyboard-only and screen-reader walkthroughs, identify issues that automated tools miss, review flows, screens and components for accessibility risks, and provide specific, actionable feedback to other designers. The candidate should help teams design accessibly from the start rather than retrofit accessibility at the end of delivery. This is also a capability-building assignment. Over time, the person will contribute to accessibility methodology, standards, reviews, awareness activities, training guidance, integration with design-system practices and stronger accessibility ownership across product teams. The assignment combines senior UX craft, practical audit experience and an enablement mindset. The candidate profile: • Proven experience as a Senior UX Designer with a strong specialization in digital accessibility and inclusive design. • Hands-on experience assessing web or digital product journeys against WCAG 2.2 AA and translating findings into practical design and development guidance. • Ability to conduct manual accessibility evaluations, including keyboard-only navigation checks and screen-reader walkthroughs with tools such as NVDA, VoiceOver or JAWS. • Ability to use automated accessibility tools as support, while applying human judgement to issues such as reading order, focus behaviour, labels, announcements, cognitive load, design consistency and interaction quality. • Experience reviewing designers’ work and providing clear, specific and actionable feedback that helps teams ship more accessible solutions. • Experience prioritising accessibility issues by severity, user impact and delivery constraints, and converting findings into backlog-ready remediation actions. • Experience of conducting usability tests with users with disabilities, e.g. people with visual, cognitive or reading impairments. • Good understanding of design systems and how accessible components, patterns and standards reduce repeated remediation work across products. • Ability to collaborate across UX, product, engineering, compliance/legal and portfolio stakeholders in a cross-functional operating model. • Relevant accessibility certification or current training is expected or strongly preferred: IAAP WAS / CPWA preferred; CPACC, DHS Trusted Tester, W3C WAI training or equivalent demonstrable experience considered a strong plus. • Motivation to contribute not only to audits, but also to standards, methodology, training and awareness activities and capability-building across DxD / DTO. Min Years: 12 Max Years: no upper limi